AEMC MF 300-10-2-10-HF, Руководство пользователя

Страница: 16 / 20

14
MiniFlex
®
Flexible AC Current Probe
CHAPTER 5
MAINTENANCE
5.1 Maintenance
Warning
• For maintenance use only specified replacement parts.
• To avoid electrical shock, do not attempt to perform any servicing
unless you are qualified to do so.
• To avoid electrical shock and/or damage to the instrument, do not
get water or other foreign agents into the case.
• Turn the instrument OFF and disconnect the unit from all the cir-
cuits before opening the case.
5.1.1 Battery Replacement
The battery must be replaced when the green indicator flashes or remains
off when the instrument is switched on.
• Disconnect everything connected to the instrument and set the
switch to OFF.
• Use a screwdriver to unscrew the two screws on the housing.
• Replace the old battery with a new one (9V alkaline or lithium bat -
tery of type 6LF22).
• Close the housing, making sure that it is completely and correctly
closed, then screw both screws back in.
5.1.2 Cleaning
• It is important to keep the sensor latch mating surfaces clean to
prevent foreign matter from entering the closing.
• The sensor may be gently cleaned with a soft cloth, soap and
water. Dry immediately after cleaning. Avoid water penetration
into the electronic module.
• Make sure the sensor, electronic module, and all leads are com -
pletely dry before any further use.