AEMC CM605, Руководство пользователя

Страница: 13 / 24

AC Clamp-on Meter Model CM605
11
4.3 DC Current Measurement
NOTE: Remove the test leads before measuring current
• Turn the rotary range switch to the range.
• If needed, the display may be “zeroed”. Press the ZERO button to zero the read -
ing.
• Press the lever to open the jaws.
•
Clamp the jaws around the conductor to be measured.
• If reading is unstable and is hard to read, push the HOLD button and read the
measurement.
WARNING: Immediately unclamp the meter from the conductor under
test if overload " " is displayed.
ZERO
OFF
HOLD
PEA
K
Press
2 Se
c
CO
M
600
V
CA
T II