12
1.5.2. Date and Time
Accurate date and time data is critical for correct camera operation. For example, by default files stored in the
camera are named with date and time information (see
). To set the date and time:
1. In the Main screen, press
F1
to display the Main configuration menu.
2. Highlight Parameters and then press
F2
to display the Parameters menu.
3. Select Adjustments and press
F2
to display the Adjustments menu.
4. Select Date/Time
and press
F2
to display the Date/Time menu.
5. Use the left and right navigation buttons to select the parameters to modify.
6. To edit a selected setting, press
F2
and use the up and down buttons to change the setting.
7. Press
F2
to save the setting.
8. When all settings have been selected, select Validate and press
F2
.
Note that the Date/Time menu opens automatically at start-up if power to the internal clock has been interrupted.
1.5.3. Units of Measure (Temperature and Distance)
1. Open the Adjustments menu by pressing
F1
in the Main screen and selecting Parameters >
Adjustments.
2. Select
to display the units in which temperature and distance are displayed:
Temperature: Fahrenheit (°F) or Celsius (°C). Default is Fahrenheit.
Distance: Foot (ft) or Meter (m). Default is Foot.
3. Select the desired units and press
F2
to save the settings.
1.5.4. Trigger Function
The camera trigger can be configured to perform different tasks when pressed.
1. Open the Adjustments menu by pressing
F1
in the Main screen and selecting Parameters >
Adjustments.
2. Select
Trigger
to display the Trigger menu. This lists the following options.
Aim
(the default) configures the trigger to toggle the display from the infrared image to the visible
camera image. The laser lights when the trigger is pressed. When this option is selected, the
TA
icon
is displayed in the status bar at the top of the screen. When an image is recalled, the trigger is
automatically assigned this function. When you exit the recalled image, the user-selected function is
restored.
Freeze
configures the trigger to stop the continuous updating of the display and “freeze” the
image. Both the infrared and visible images are frozen; you can toggle between them by pressing
F3
.
When this option is selected, the
TF
icon is displayed in the status bar. Pressing the trigger again
restarts continuous acquisition.
Save
configures the trigger to
freeze the infrared and visible images, and then record them
on the micro SD card (if one is present). When this option is selected, the
TS
icon is displayed in the
status bar. Each press results in another save, creating derivative files if image acquisition is not
restarted between presses. To restart continuous acquisition, press
F2
and then press
F2
again.
Laser
configures the trigger to turn ON the laser pointer when the trigger is depressed.
Releasing the trigger turns OFF the pointer. When this function is selected, the
TL
icon is displayed in
the status bar.
www.
.com
1.800.561.8187
Содержание 1954
