AEMC 1954, Руководство пользователя

Страница: 6 / 41

7
1.2.1. Battery Management
After the batteries are installed or replaced, the Battery management menu
appears when the camera first starts up. This menu can also be displayed by
pressing and holding down the F2 button when the camera is powered ON.
In the Battery management menu, the function buttons perform the following:
F1 confirms the information entered, closes the window, and initializes
the settings.
F2 edits and confirms entry of the selected item.
F3 cancels an entry or closes the window without resetting the battery
options.
The Battery management menu can operate in one of two modes:
Advanced Off (Default) is display-only; you cannot change any settings in this mode. In default mode, the
battery icon only appears when battery power is low. When this icon appears, the camera will operate for
approximately 30 minutes and then shut down automatically.
Advanced On allows more precise tracking of battery energy consumption, including the type of batteries used
and their estimated capacity. In Advanced mode, the battery icon indicates how much charge is left in the
batteries. Initially this icon is green: . When the remaining charge is low this icon appears yellow: . When
30 minutes of charge remains, this icon appears as .
To change mode, ensure the Advanced icon is selected. If not, use the arrow buttons to select it. Press to edit
the setting, and use the up and down buttons to change the setting to the desired option. Then press to
confirm the change.
Type of batteries: The camera is delivered with low-self-discharge NiMH rechargeable batteries with a capacity of
approximately 2500mAh. These are the default parameters.
If you consistently use the same set of rechargeable batteries, we recommend operating the camera
until it automatically switches OFF due to low batteries. This automatically recalculates and adjusts the
estimated capacity of the batteries. The new capacity is displayed by default the next time the Battery
management menu is displayed.
1.3. Micro SD Memory Card Installation
Camera files (images, audio, and setup) are stored in the micro SD
memory card located on the left side of the head (see photo to the left). If
this card is not installed, an error message appears when the camera
attempts to access it. This card is provided with the camera.
Before installation, the memory card must be formatted in one of the
following formats:

FAT16

FAT32
To insert the card, open the rubber flap and push the card into its slot. If the
card cannot be inserted, ensure that:

The card is facing in the correct direction

The card slot is empty
www. .com
information@itm.com 1.800.561.8187