AMS42/AMS44 Dual Channel Audio Controller
SM19 Installation and Operation Manual
May 29, 2012 Rev: 5.00
Page 2-1
ENG-FORM: 805-0100.DOTX
CONFIDENTIAL AND PROPRIETARY TO ANODYNE ELECTRONICS MANUFACTURING CORP.
Section 2.0 Installation
2.1 Introduction
Installation information in this section consists of unpacking and inspection procedures, installation
procedures, post-installation checks and installation drawings. Check all notes and cautions before
installation.
2.2
Unpacking and Inspection
Unpack the equipment carefully. Inspect the unit visually for damage due to shipping and report all such
claims immediately to the carrier involved. Note that each unit should have the following:
- AMS42/44 Dual Channel Audio Controller
- Product Information Card
- Certificate of Conformity
Verify that all items are present before proceeding and report any shortage immediately to your supplier.
2.2.1 Warranty
All Anodyne Electronics Manufacturing Corp. (AEM) products are warranted for 2 years. See the website
www.aem-corp.com/warranty for complete details.
2.3 Continued
Airworthiness
Maintenance of the AMS42 or AMS44 Dual Channel Audio Controller is ‘on condition’ only. Periodic
maintenance of this product is not required.
2.4
Installation Procedures
2.4.1 Warnings
Í
Í
IMPORTANT!
Do not bundle any lines from this unit with transmitter coax lines. Do not bundle any lines from
this unit with 400 Hz synchro wiring, or AC power lines.
Failure to observe these limitations may
result in incorrect or intermittent operation, or severe audio interference on received and transmitted
signals.