- 6 -
【 ５ 】：
Description of grab pressurizing jig
⑭ ：
Pressurized jig flat
⑮ ：
Pressurized jig circle
(
for pocket
)
Prepared according to the purpose of kneading and molding the grab
(
standard comes with one flat
)
⑯ ：
Jig mounting screw is a connection part between the grab pushing jig and the cylinder.
Please install it securely with the specified tool.
After installing the jig, also tighten each set screw.
Cylinder side screw opposite side 32 mm Jig side mounting screw opposite side 50 mm
⑰ ：
Attached spanner 32 mm-50 mm 2 pieces
【 ６ 】：
Cylinder end absorber adjustment
The photo on the left is a screw for
adjusting the absorber when the cylinder is
fully extended up and down.
⑰
: Adjustment screw for soft spp on the
upper end
⑱
: Adjustment screw for soft spp at the
lower end
Adjust with a hex wrench
Please adjust while watching the movement
It changes depending on the air pressure.