- 4 -
【 ３ 】：
Control panel explanation
① ：
After inserting the power switch 100 / 110V plug, turn it on and the power lamp of
②
will light up.
If you operate the foot switch in this state, the cylinder will descend and pressure will be applied to the grab.
When the switches
①
and
③
are turned on, the cylinder can be continuously moved up and down according
to the set time of the timer.
⑤ ・ ⑥
How to set the timer with the knob
：
⑤ (
Small red knob
)
is the time when the cylinder is raised and waiting
⑥
Time when the cylinder is lowered and pressurized
(
large green knob
)
Both photos are set to about 1 second.
※
If you turn on the automatic switch, the cylinder will drop immediately, so be careful not to pinch anything
other than the grab.