- 3 -
【 ２ 】：
Structure and specifications
【
Construction
】
① ：
Pressurized cylinder
80
φ
-200 stroke
Reference Pressure of about 280 kg/617lb
at 0.6 MPa
② ：
Cylinder operation valve
AC100/110V operation
③ ：
Pressurizing jig
Resin push jig
④ ：
Air regulator
Air pressure adjustment / manual drainage
function
⑤ ：
Control panel
(
automatic / manual
)
Manual descent operation with power SW.ON
+ foot SW Rise
(
release
)
with OFF
Continuous up / down operation with automatic
SW.ON
Timing can be controlled with a timer
Details are explained in a separate figure
⑥ ：
Foot switch
Descend with manual mode + foot SW
If you take your foot off, it will rise.
⑦ ：
Working table
Put a grab here and knead it up.
⑧ ：
Machine frame
【
specification
】
Power supply: AC100/110V-10W
mass： 64kg/141lb
Air
source
：
Please
prepare
a
compressor
of
0.7MPa-2.2KW or more.
For a compressor with a small capacity, use it
together with the auxiliary tank.
If the air source is insufficient, it will not be possible to knead sufficiently.
Relationship between air regulator adjustment and
pressurizatio
The table is a reference value of
[
4
] ⑩
regulator
adjustment and actual pressurization.