AEM 30-4100 Скачать руководство пользователя страница 10

 

Specifications 

Gauge 

Supply Current (nominal): 1.3 

amps 

0-5V Analog Outputs: 

Measuring Range: 

 0.751 to 1.143 Lambda 

Harness & Connector Temp Limit: 

120C 

Sensor 

Type: 

Bosch UEGO LSU4.2 

Accuracy: +/- 

0.7% 

Exhaust Temp Limit: 

1030C 

Cable & Protector Sleeve Temp Limit:250C 
Connector Temp Limit: 

120C 

Initial Warm-up Time: 

Less than 20 seconds 

Weight: 80 

grams 

Heater Current: 

1.2A at 12.0V (each sensor) 

Mounting: 

M18 X 1.5 thread, Torque to 30 ft-lbs 

Nominal Service Life: 
 
 
 

80,000 km for Unleaded Fuel 
50,000 km for Leaded Fuel 0.15g Pb/l 
20,000 km for Leaded Fuel 0.40g Pb/l 
10,000 km for Leaded Fuel 0.60g Pb/l 

 

Notes 

The sensor contains a ceramic module and should not be subject to mechanical or 
thermal shock or it may be damaged. The sensor is not designed for operation on 
leaded fuels, doing so will dramatically shorten sensor life. Long term running in the rich 
region (Lambda < 0.95) will shorten sensor life. High exhaust temperatures (over 850C) 
will shorten sensor life. Engine oil consumption at a rate greater than 1 quart per 1,000 
miles will shorten sensor life. With the UEGO Sensor installed, do not run the engine 
without power applied to the gauge. 

 

12 MONTH LIMITED WARRANTY 

 
Advanced Engine Management Inc. warrants to the consumer that all AEM High Performance products will be free 
from defects in material and workmanship for a period of twelve (12) months from date of the original purchase. 
Products that fail within this 12-month warranty period will be repaired or replaced at AEM’s option, when 
determined by AEM that the product failed due to defects in material or workmanship. This warranty is limited to 
the repair or replacement of the AEM part. In no event shall this warranty exceed the original purchase price of the 
AEM part nor shall AEM be responsible for special, incidental or consequential damages or cost incurred due to the 
failure of this product. AEM does not warranty the UEGO sensor. Warranty claims to AEM must be transportation 
prepaid and accompanied with dated proof of purchase. This warranty applies only to the original purchaser of 
product and is non-transferable. All implied warranties shall be limited in duration to the said 12 month warranty 
period. Improper use or installation, accident, abuse, unauthorized repairs or alterations voids this warranty. AEM 
disclaims any liability for consequential damages due to breach of any written or implied warranty on all products 
manufactured by AEM. Warranty returns will only be accepted by AEM when accompanied by a valid Return 
Goods Authorization (RGA) number. Credit for defective products will be issued pending inspection. Product must 
be received by AEM within 30 days of the date the RGA is issued. 
 

 

AEM CUSTOM GAUGES

CAR GAUGES

Содержание 30-4100











Отзывы: