7
E. Loosely install the flat washer (C) and M6
flanged hex nut (D) over the M6 mounting stud as
shown. Do not tighten yet.
H. If you drive regularly in inclement weather, con-
sider installing an AEM® Pre-Filter Wrap to protect
your Dryflow™ filter for added peace of mind. See
www.aemintakes.com
for more info.
G. Inside the fender well, mount your new AEM® Dry-
flow™ Air Filter (G) onto the intake tube inlet. Rotate
the offset filter to clear the fog lamp and the wheel
well cover, and then secure with the hose clamp.
F. Once properly seated, tighten the second hose
clamp at the intake tube outlet connected to the
throttle body.
G. Connect the breather hose onto the intake tube
at the breather nipple using the stock clamp as
shown.
F. Re-connect the PCV hose at the valve cover.
