4
E. Unfasten the airbox clamps and remove the
stock airbox lid and intake tube.
I. Using a #2 Phillips screwdriver, unscrew the 2
plastic clips retaining the plastic underside brush
guard to the front bumper on the driver’s side,
then remove the clips.
F. Remove the stock air filter. Do not discard.
G. Remove the 3 M6 mounting bolts with a 10mm
socket. Slide the lower airbox housing to the left
and remove it from the engine bay.
H. Depress the center buttons of the two plastic
clips retaining the stock intake scoop to the radia-
tor support. Pull up on the clips to remove them,
then remove the stock intake scoop.
J. Raise the vehicle safely and remove the left front
(driver’s side) wheel. Make sure to set the parking
brake, chock the rear wheels, and
use proper jack
stands before working under the vehicle
.
