SPECIFICATIONS
!
!
!
!
!
!
!
!
!
!
Operation Voltage
Code Combinations
A)
Duress Output
Dimensions
Weight
:
Single User Mode --- 10,000 for each User Code
(DK-9880) -- 117(W)mm X 21(D)mm X 117(H)mm,
Slim Plastic Case
(DK-9680) -- 155g net
(DK-9880) -- 130g net
Specifications are subject to change for modification without notice
: 12V AC/DC Nominal , 10-14VAC or 12-16VDC
: Version ) 15-150mA; Version ) 15-110mA; Version ) 15-80mA
:
Single User Mode
- User Code 1, 2 & 3 (Fixed to 4 Digits)
- Master Code (Fixed to 4 Digits)
- Duress Code (Fixed to 4 Digits)
- Accelerated Code (2 Digits)
Multi User Mode
- User Codes in Group 1 - 100 Users (4-8 Digits)
- User Codes in Group 2 - 10 Users (4-8 Digits)
- User Codes in Group 3 - 10 Users (4-8 Digits)
- Master Code (4-8 Digits)
- Super User Code (4-8 digits Plus Output Number)
- Duress Codes (4-8 Digits)
- Accelerated Codes (2 Digits)
Multi User Mode ----- 111,110,000 for each User Code
: Output 1 -- 5A / 30VDC Max, N.C. & N.O. Dry Contacts,
Other Outputs -- 1A / 30VDC Max. N.C. & N.O. Dry Contacts (or NPN open
collector output)
: 100mA Sink / 12VDC Maximum, Open Collector switches to ground (-)
: 10 seconds, auto refresh
: 30 seconds, auto refresh
: Master Unit -- 120(W)mm X 87(D)mm X 32.5(H)mm
Keypad Unit: (DK-9680) -- 84(W)mm X 41(D)mm X 129(H)mm,
Weatherproof Plastic Case
: Master Unit -- 200g net
Keypad Unit :
A dry contact means that no electricity was connected to it. It is prepared for free connections. Usually the relay
output contacts provided in a keypad system are dry contacts.
Stands for Normally Closed, the contact is closed circuit at normal status. It is open circuit when activated.
Stands for Normally Open, the contact is open circuit at normal status. It is closed circuit when activated.
An open collector output is equivalent to a Normally Open (N.O.) contact referring to ground similar to an N.O.
relay contact referring to ground. The transistor is normally OFF, and its output switches to ground (-) when
activates. The open collector transistor can only provide switching function for small power but it is usually
good enough for controlling of an alarm system.
Current Drain
A
B
C
Operation Codes Available
A)
B)
B)
Relay Output Contacts
Digit Entry Allowable Time
Code Entry Allowable Time
DRY CONTACT
N.C.
N.O.
TRANSISTOR OPEN COLLECTOR OUTPUT
APPENDIX
!
!
!
!
15
TYPICAL APPLICATION
Output 1:
Output 2:
Output 3:
Door Strike
Alarm Control
Auxiliary Security or Access Control
* Please consult your alarm / security system manual for the selection of N.C. or N.O. for the system ON-OFF
control. For those Open Collector Outputs at the DK-9680B / DK-9880B and DK-9680C / DK-9880C, please
consider them as N.O. output contacts referring to (-) ground.
RED LED
GREEN LED
FOR FREE CONNECTIONS
M A I N S
K E Y
A R M E D
L O C K
DOOR
B E L L
1
2
3
4
5
6
7
8
9
0
#
REMOTE KEYPAD
(inside the premises)
ALARM SYSTEM
AUXILIARY SYSTEM
OUTPUT 2
OUTPUT 3
OUTPUT 1
EGRESS
BUTTON
(inside the premises)
N.O.
12V DC
ELECTRIC
LATCH
MAGNETIC SWITCH
MC-01
N.C.
DOOR SENSING
(DK-9880)
or
(DK-9680 -- outside the premises)
12V AC/DC
POWER SUPPLY
DK-9680A /
DK-9880A
16
SINCE 1979
AEI ADVANCED ELECTRONICS INDUSTRY LTD.
#
