14
31
Lamp replacement
Unplug the power cord.
Remove the lamp cover.
Remove the tube.
Replace the original florescent lamp with a new lamp.
Switch on the power.
Replacement lamp must have the same specification as the original one.
(1)
EL-RG-9H
/
14H
is equipped with a fluorescent lamp on the upper front part of the
refrigerator.
When you change the tube, please pay attention:
Cleaning and Maintenance
Component Cleaning
To avoid electric shock or personnel injuries, make sure to power off the
refrigerator before any repair work or maintenance is performed.
Make sure no drug or aerosol around the refrigerator is inhaled during
maintenance, otherwise your health will be threatened.
Refrigerator cleaning
The refrigerator should be cleaned once a month to keep the appearance new and reduce the
chance for gem formation.
Use a damp cloth to clean off dust on the refrigerator. If necessary, use light detergent water to
wipe off the unit if necessary. Then use a dry cloth to wipe it again.
Do not dump water directly onto the interior of the unit to avoid damage to electrical systems.
Compressor and other mechanical parts are hermetically sealed. They don’t need lubrication.
(2)
EL-R/G 12H/16H/23H/31H/33H
is equipped with a LED lamp. To replace the lamp,
please contact
the service department.
Purchasing chart paper for temperature chart recorder
The chart recorder papers are imported chart papers designed for the recorder. The papers that are
supplied with the unit usually last about half of a year. When you are running short of the chart paper,
please contact
Aegis
to purchase more. The lead time to deliver the charts is 15 days after receiving
the payment . Please call
Aegis
for details.
If the starter is defective, remove the old starter and install a new starter.
Caster
Leveling leg
EL-R/G 12H/16H
USB port(Optional)
Battery
switch
Interior light
Door lock
Control panel
Handle
Door ajar
alarm switch
Light switch
Shelf
Glass door
