18
10.3 Handset
registration
Important:
When you purchase your phone, all handsets are already registered to
your base, so you do not need to register them.
Handset registration is only necessary when you buy extra handsets or if a
handset has become faulty.
You can register additional handsets to have up to five handsets per base
unit, with each handset‘s number (1 to
5
) shown on its display. (Note: each
handset can only be registered to one base.)
To register a new handset to your base:
t
Press and hold on the base station for more than five seconds, to
put the base station into registration mode. It will stay in registration
mode for about 1 minute, so the following handset sequence must be
completed within this time.
t
Press and
/
to select “REGISTRATION”.
t
Press
OK
to display PIN?------.
t
Enter the 4-digit system PIN (default 0000).
t
Press
OK
to confirm, and the display will show “SEARCHING”.
If the handset registration is successful, you will hear a confirmation tone
and the
will stop flashing.
The handset will automatically be allocated the next available handset
number. This handset number is shown in the handset display in standby
mode. If the handset registration is unsuccessful, the
will still flash.
11 ANSWERING
MACHINE
Your phone includes a telephone answering machine that records
unanswered calls when it is on.The answering machine can store up to
5
9 messages within the maximum recording time of approximately 1
5
minutes. As well as recording incoming messages, you can record memos
for other users of your phone.
If the answering machine memory is full, the Handset will display “TAM
FULL” alternately with the handsets name or time, depending on the
handset standby display mode set. You will have to delete some messages
before any new ones can be recorded.
