AEG voxtel c110, Быстрый старт

Страница: 9 / 120

9
UK
8.10 To delete an outgoing call record
t
In standby mode, press the out button repeatedly until the display shows the the outgoing call
record you want to delete.
t
Press the delete button to delete the outgoing record.
>The display shows the next outgoing record.
t Press and hold the delete button for 3 seconds to delete all the outgoing call records.
>The display automatically returns to standby mode.
8.11 Mute function
t
During a call press the mute button .
>When the mouthpiece is muted, the “ mute ” symbol is shown on the display and the person at the
other end of the call cannot hear you, but you can hear his side.
t To get back to the call, press the mute button again.
8.12 Hold function
t
During a call press the hold button .
>When the hold is on, the display shows “ hold ”, a melody is played to line and the mouthpiece
is muted so the person at the other end of the call cannot hear you, but you can still hear them.
t To get back to the call,press the hold button again.
8.13 Inserting a pause in the dialling sequence
For some PABX, an access number must be dialled (usually an 0 or 9) to get an outside line, before
dialling the rest of the number.
t Press the pause button after the access number and then dial the rest of the number you require.
This will insert a pause of about 3 seconds between the access number and the rest of the number.
8.14 Storing a number in M1-M2-M3 memories
t In standby mode, key in the telephone number you wish to store.
>Up to a maximum 14 digits.
t
Press store button
>The display shows “ SAVE ”
t
Press the M1 , M2 or M3 button to store it in the selected memory.
8.15 To delete direct records memory
To delete a number from a direct memory (M1-M3).
t In standby mode, press the M1 , M2 or M3 button.
>The display shows the memory number.
t Press the delete button to delete the stored number.
>The display shows “ dEL ”
8.16 Dial out a direct memory
t Lift up the handset or press the speakerphone button then press the M1 , M2 or M3 button you
want to dial.
>The number dials automatically.
8.17 Storing a number in (0-9) two-touch memories
t
In standby mode, key in the telephone number you wish to store.
>Up to a maximum 14 digits.
t Press store button
>The display shows “ SAVE ”
t Press a (0-9) button to store the number in the selected memory.
9