AEG SCS8191LTS, Руководство пользователя

Страница: 7 / 20

The set temperature will be reached
within 24 hours.
3.7 High temperature alarm
Temperature increase in the freezer
compartment (for example due to an
earlier power failure or door is open) is
indicated by:
• alarm light flashing;
• sounding of a buzzer.
1. Switch off the buzzer by pressing the
alarm reset button. Alarm indicator
light will flash.
2. Press alarm reset button.
The alarm indicator light is off at the
same time freezer temperature
indicator is shown for 5 seconds the
warmest temperature reached in the
freezer compartment.
When normal conditions are
restored, the alarm stop
flashing and the buzzer turn
off automatically.
3.8 COOLMATIC function
The COOLMATIC function is suitable for
quick cooling of large quantities of
goods in the refrigerator.
To activate the function:
• Press the fridge temperature
-
button
(several times if necessary) until the
word SC appears in the display.
A temperature of +2°C is
automatically selected.
To deactivate the function:
• Press the fridge temperature +
button .
The COOLMATIC function
stops automatically after
about 6 hours.
If the COOLMATIC function is switched
on the temperature setting may not be
changed.
3.9
FROSTMATIC function
The FROSTMATIC function accelerates
the freezing of fresh food and, at the
same time, protects foodstuffs already
stored from undesirable warming.
To switch on the fuction:
• Press the FROSTMATIC button.
The FROSTMATIC indicator will light
up.
To switch off the function before its
automatic end, repeat the steps until
FROSTMATIC indicator goes off.
The FROSTMATIC function
stops automatically after
about 52 hours.
If the FROSTMATIC function is switched
on the temperature setting may not be
changed.
3.10 Holiday function
This function allows you to keep the
refrigerator shut and empty during a
long holiday period without the
formation of a bad smell.
The fridge compartment
must be empty when the
holiday function is on.
To activate the function:
• Press the temperature regulator
(warmest) until the letter H (Holiday)
appears on the temperature indicator.
The Holiday function sets the
temperature approxi15°C.
The refrigerator is in the energy saving
set.
To switch off the function press the
fridge temperature regulator to set
required temperature.
3.11 DYNAMICAIR function
To switch on the function:
• Press the DYNAMICAIR button.
The DYNAMICAIR indicator is shown.
To switch off the function before its
automatic end, repeat the steps until
DYNAMICAIR indicator goes off.
If the function is activated
automatically the
DYNAMICAIR indicator is
not shown (refer to "Daily
use"). The activation of the
DYNAMICAIR function
increases the energy
consumption.
ENGLISH 7