AEG SCE81826TS, Руководство пользователя

Страница: 15 / 60

Problem Possible cause Solution
Audible or visual alarm is on. The cabinet has been re-
cently switched on or the
temperature is too high.
Refer to "High temperature
alarm".
The temperature in the ap-
pliance is too high. Contact a qualified electrician
or contact the nearest Author-
ised Service Centre.
The door is left open. Close the door. Refer to "Door
open alarm"
A or symbol is shown
instead of numbers on the
Temperature Display.
Temperature sensor prob-
lem. Contact the nearest Author-
ised Service Centre (the cool-
ing system will continue to
keep food products cold, but
temperature adjustment will
not be possible).
The lamp does not work. The lamp is in stand-by. Close and open the door.
The lamp is defective. Contact the nearest Author-
ised Service Centre.
The compressor operates
continually. Temperature is set incor-
rectly. Refer to "Operation".
Many food products were
put in at the same time. Wait few hours and then check
the temperature again.
The room temperature is
too high. Refer to climate class chart on
the rating plate.
Food products placed in
the appliance were too
warm. Allow food products to cool to
room temperature before stor-
ing.
The door is not closed cor-
rectly. Refer to "Closing the door".
The "Frostmatic function"
or "Coolmatic function" is
switched on. Refer to "Frostmatic function"
or "Coolmatic function".
There is too much frost and
ice. The door is not closed cor-
rectly or the gasket is de-
formed/dirty. Refer to "Closing the door".
The water drainage plug is
not correctly positioned. Position the water drainage
plug in the correct way.
Appliance is fully loaded
and it is set to the lowest
temperature Set a higher temperature. Re-
fer to "Operation".
ENGLISH 15