AEG Protect A. 1000, Руководство по эксплуатации

Страница: 27 / 36

27
EN
4) If the UPS is in battery mode, the “BATTERY” pictogram
lights up and the battery symbol flashes every second.
The remaining standby time is displayed during battery
operation according to the load applied. This time is shown
in minutes and is indicated by the “MIN” pictogram.
i
The display shows “0” if the voltage values
detected for the input or output are below 40
VAC.
5) The following sample display shows battery charging with
the master switch switched off.
i
The value “0” is automatically displayed for
“OUTPUT” if the UPS is in this switched-off
condition.
ATTENTION: This does not been the unit has
been de-energised in accordance with VDE
definitions!
6) Fault indication by the “FAULT” pictogram, associated with a
digital fault code in accordance with the table below:
Fault indications with the “FAULT” pictogram lit up.