The water supply is sufficient for
approximately 50 minutes.
Do not fill the water drawer over its
maximum capacity. There is a risk of
water leakage, overflow and furniture
damages.
3.
Push the water drawer to its initial
position.
4.
Activate the appliance.
5.
Set the steam function (refer to the
"Oven functions" table) and the
temperature.
6.
If necessary, touch to set the
DURATION or END function
(refer to "Setting the END" or
"Setting the DURATION").
The first steam shows after
approximately 2 minutes. An acoustic
signal sounds when the appliance is at
approximately the set temperature. The
signal sounds again at the end of the
cooking time.
7.
Touch to deactivate the acoustic
signal and the appliance.
7.
CLOCK FUNCTIONS
7.1
Clock functions table
Clock function
Application
COUNT UP TIMER
To set the count up, which shows how long the appli-
ance operates. This function has no effect on the opera-
tion of the appliance.
TIME OF DAY
To show the time of day. To change the time of day, re-
fer to "Setting the time".
DURATION
To set how long the appliance operates.
END
To set when the appliance deactivates. You can use Du-
ration and End at the same time (Time delay) if you want
the appliance to activate and deactivate automatically
later.
SET+GO
To start the appliance with necessary settings with only
one touch of the sensor field any time later.
7.2
Count Up Timer
The Count Up Timer is not
activated if Duration and
End are set.
The Count Up Timer starts to count when
the appliance starts to heat.
1.
To reset the Count Up Timer, touch
again and again until flashes in
the display.
2.
Touch
until the display shows
"00:00" and the Count Up Timer
starts to count up again.
7.3
Setting the DURATION
1.
Activate the appliance and set an
oven function and temperature.
2.
Touch again and again until the
display shows .
flashes in the display.
3.
Use
or
to set the minutes for
DURATION.
4.
Touch
to confirm.
5.
Use
or
to set the hours for
DURATION.
www.aeg.com
14
