background image

20

21

EN

DISPLAYED MESSAGE

POSSIBLE CAUSE

REMEDY

FILL TANK! 

The water tank is empty or positioned 

incorrectly.

Fill the tank with water and/or insert it correctly, 

pushing it as far as it will go.

GROUND TOO FINE ADJUST MILL AND 

alternating with PRESS OK

The grinding is too fine and the coffee 

is delivered too slowly. 

Turn the grinding adjustment knob one click 

clockwise towards “7”.

GROUND TOO FINE ADJUST MILL AND

(alternating with)

PRESS OK

(then)

FILL TANK

The tank has been removed during 

delivery. 

Insert the tank and press the OK icon (B9). 

“HOT WATER PRESS OK” is displayed.

Press the OK icon (B9) again.  

The appliance is once again ready for use.

EMPTY WASTE COFFEE CONTAINER 

The waste coffee container (A4) is too 

full or more than 3 days have pas-

sed since you last made coffee (this 

guarantees correct hygiene of the 

machine). 

Empty the waste coffee container and clean, 

then replace. 

Important: when removing the drip tray, the wa-

ste coffee container MUST be emptied, even if it 

is not completely full.

If this is not done, when you make the next cof-

fees, the waste coffee container may fill up more 

than expected and clog the machine. 

INSERT WASTE COFFEE CONTAINER

After cleaning, the waste coffee con-

tainer has not been replaced.

Open the service door and insert the waste coffee 

container.

INSERIRE CAFFÈ PRE-MACINATO

The “pre-ground coffee” function has 

been selected without placing any 

pre-ground coffee in the funnel.

 The funnel (A21) is blocked. 

Extract the appliance and place pre-ground cof-

fee in the funnel. 

Empty the funnel with the help of a knife as de-

scribed in the section “Cleaning the pre-ground 

coffee funnel”.

PLEASE DESCALE! 

The machine must be descaled. 

The descaling procedure described in the “Desca-

ling” section needs to be performed as soon as 

possible.

LESS COFFEE

Too much coffee has been used.

Select a milder taste or reduce the quantity of 

pre-ground coffee, then make the coffee again.

FILL BEAN CONTAINER

The coffee beans have run out.

Fill bean container

INSERT BREWING UNIT

The brewing unit has not been repla-

ced after cleaning. 

Insert the brewing unit as described in the sec-

tion “Cleaning the brewing unit”. 

CLOSE DOOR

The service door is open

Close the service door.

GENERAL ALARM! 

The inside of the appliance is very 

dirty.

Clean the inside of the appliance thoroughly, as 

described in the section “Cleaning and mainte-

nance”. 

If the message is still displayed after cleaning, 

contact a customer services.

DISPLAYED MESSAGES

Содержание PE 4541-M




















Отзывы: