18
EN
• Make sure the clock on the appliance has been set.•
Press the
icon (B2) to enter the menu and then the
icons (B7) and (B8) until “START TIME” is displayed.
• Press the OK icon (B9).
• Use the
icons (B7) and (B8) to set the auto-start
time, then press the OK icon (B9) to confirm.
• Use the
icons (B7) and (B8) to set the minutes, then
press the OK icon (B9) to confirm.
• Press the
icons (B7) and (B8) to activate the auto-
start function until “AUTO START” is displayed.
• “AUTO START PLEASE CONFIRM” is displayed. PRESS THE OK
ICON (B9). The
symbol appears on the display.
• Press the ESC (B6) icon (B6) to exit the menu.
• To disable auto-start, press the
icon (B2), then the
icons (B7) and (B8) until “AUTO START” is displayed.
Press the OK icon (B9).
“PLEASE CONFIRM” is displayed
Press (B6) to disable, the ESC symbol disappears
.
Changing coffee temperature
To change coffee temperature, proceed as follows:
• Press the
icon (B2) to enter the menu and then the
icons (B7) and (B8) until “TEMPERATURE” is displa-
yed.
• Press the OK icon (B9).
• Press the
icons (B7) and (B8) to select the required
coffee temperature from low, medium and high.
• Press the OK button (B9) to confirm the temperature selec-
ted.
• Press the ESC icon (B6) to exit the menu.
Setting water hardness
The operating period can be extended if required, making desca-
ling less frequent by programming the machine on the basis of
the real lime content in the water used.
Proceed as follows:
• remove the “Total Hardness Test” strip (attached to page 2)
from its packaging then dip it fully in the water for a few
seconds,
Then remove and wait about 30 seconds (until it changes
colour and forms red squares).
• turn the appliance on by pressing the ON/OFF/stand-by
button (A7).
• Press the
icon (B2) to enter the menu and then the
icons (B7) and (B8) until “WATER HARDNESS” is di-
splayed.
• Press the OK icon (B9).
• Press the
icons (B7) and (B8) until the number coin-
cides with the number of red squares on the test strip (for
example, if there are 3 red squares on the test strip, select
the message “WATER HARDNESS 3”
• Press the OK icon (B9) to confirm.
The coffee maker is now programmed to provide the desca-
le warning when actually necessary.
Programming coffee
For instructions on programming coffee, see the “CHANGING THE
QUANTITY OF COFFEE IN THE CUP” section.
Programming cappuccino
For instructions on programming cappuccino, see the section
“CHANGING THE QUANTITY OF MILK AND COFFEE FOR CAPPUC-
CINO”.
Programming the jug
For instructions on programming the jug, see the section “
CHANGING JUG FUNCTION PARAMETERS”.
Programming water
For instructions, see the “CHANGING THE QUANTITY OF HOT WA-
TER” section.
Descaling
Important!
Descaler contains acids.
Respect the safety warnings provided by the manufacturer and
given on the descaler pack.
N.B.:
Use the descaler recommended by the manufac-
turer only.
Use of other descalers invalidates the guarantee.
Failure to descale the appliance as described also invalidates the
guarantee.
When “PLEASE DESCALE !” is displayed, the machine requires
descaling.
Proceed as follows:
• make sure the machine is ready;
• Press the
icon (B2) to enter the menu and then the
icons (B7) and (B8) until “DESCALE” is displayed.
• Press the OK icon (B9).
The message “ADD DESCALER PLEASE CONFIRM” is displa-
