START/PAUSE button, the machine starts its countdown (every hour).
During the last hour, the remaining time is displayed every 5 minutes.
The delayed start function
cannot
be used with the SPIN
F-G
and
DRAIN programme
D
.
To modify or cancel the preset delay, press the START/PAUSE button,
then press the DELAY START button until the required value is displayed
or, if you wish to cancel the delay, until the symbol
0
h is displayed.
Then press the START/PAUSE button again.
When the delay is cancelled, the display shows the duration of the wash
programme previously selected.
Programme Option buttons
Depending on the programme, different functions can be combined.
These must be selected after choosing the desired programme and
before depressing the START/PAUSE button.
When these buttons are pressed, the corresponding pilot lights come on.
When they are pressed again, the pilot lights go out.
If an incorrect option is selected, the pilot lights flash for about 3 seconds
and the message
Err
is displayed.
STAIN
To treat heavily soiled washing or stained washing with stain remover
(extended main wash with time optimised stain action phase,
not
selec-
table for wool and with temperatures lower than 40°C).
QUICK
By pressing this button the washing time is reduced. For use when
washing lightly soiled laundry.
This option is
not
available with the wool programme.
PREWASH
The machine performs a prewash cycle at 40°C max. The prewash cycle
ends with a short spin in programmes for Cotton and Synthetics, and
with emptying of the water only for Delicates.
This option is
not
available with the wool programme.
For use when washing heavily soiled laundry.
Important
: the STAIN, PREWASH and QUICK WASH options
cannot
be
selected together: one automatically disables the others.
145
144
Description of the appliance
Position
E
corresponds to the ENERGY SAVING programme at approx.
67°C for normally soiled laundry, extended washing time (cannot be
combined with STAIN
and QUICK
).
Position
corresponds to COLD WASH. To be used for extremely delicate
items.
ON/OFF button
Press this button to switch the machine on. Press it again to switch the
machine off.
Mains-on light
This light comes on when the ON/OFF button is pressed, and goes out
when it is pressed again.
START/PAUSE button
This button has three functions:
a)
Start
After having selected the required programme, press this button to start
the machine; the corresponding pilot light stops flashing.
b)
Pause
To interrupt a programme which is running, press the START/PAUSE
button: the corresponding pilot light and the light of the programme
phase which is running will start to flash.
To restart the programme from the point at which it was interrupted,
press the START/PAUSE button again
.
c)
Empty out water
At the end of a programme which ends with water in the drum (RINSE
HOLD
option), or after the “soak” programme
A
, press the START/PAUSE
button
to empty out the water: after the soak programme, the machine
will empty only; after RINSE HOLD programmes, the machine will empty and
spin.
DELAY START button
This button allows starting of the machine to be delayed from 1 hour
up to a maximum of 19 hours.
The button must be pressed after selecting the programme and
before pressing the START/PAUSE button
.
The figures indicating the required delay appear for about 2 seconds in
the display next to the button. The duration of the selected wash pro-
gramme is then displayed. One minute after depressing the
Description of the appliance
