22
Programming options
Objective
Implementation
Permanently programme
in the audible signal
which reminds you that
the programme is complete.
1. Turn the programme selector to any programme.
2. Press the
AUDIBLE SIGNAL button and hold down for
approx. 5 seconds.
A brief signal sounds several times. The
AUDIBLE SIGNAL
display flashes several times.
The setting is permanently programmed.
The setting is cancelled as described under 1 and 2.
Adjust “level of dryness”
detection:
If the laundry is slightly
drier or slightly damper
at the end of the programme
than with the
standard setting.
1. Turn the programme selector to any programme.
2. Press the
AUDIBLE SIGNAL and
SENSITIVE buttons at
the same time and hold down for approx. 5 seconds. The cur-
rent setting appears on the multi-display:
–
C0
: Setting for drier laundry
–
C1
: Standard setting
–
C2
: Setting for damper laundry
3. Press the
START/PAUSE button until the setting required
appears on the multi-display.
4. Turn the programme selector to OFF.
The setting is permanently programmed.
To deactivate the
EMPTY
WATER display when using
an external drain for
the condensed water.
1. Turn the programme selector to any programme.
2. Press the
DOOR and
SPECIAL CARE buttons at the
same time and hold down for approx. 5 seconds. The multidis-
play briefly displays ”
0
”
The
EMPTY WATER display is permanently deactivated.
The setting is cancelled as described under 1 and 2; the
multi-display however briefly displays ”
1
” (rather than
”
0
”).
125987210.qxp 2006-12-04 10:14 Page 22