Downloaded from www.vandenborre.be
5. Use the handle to pull the heat exchanger
out of the base and carry it horizontally
to prevent any remaining water from
spilling.
6. To empty the heat exchanger, hold verti
-
cally over a washing-up bowl.
CAUTION!
Do not use sharp objects to clean. The heat
exchanger could develop leaks.
7. Clean heat exchanger.
It is best to use a brush or to rinse thoroughly with a hand-held shower.
8. Replace heat exchanger and lock into place (turn both lock washers outwards until they
snap into place).
9. Close door in plinth.
CAUTION!
Never operate the dryer without the heat exchanger.
Cleaning the drum
CAUTION!
Do not use abrasives or steel wool to clean the drum.
Lime in the water or cleaning agents may form a barely visible lining on the inside of the
drum. The degree to which the laundry has been dried is then no longer detected reliably.
The laundry is damper than expected when removed from the dryer.
Use a standard domestic cleaner (e.g. vinegar-based cleaner) to wipe down the inside of
the drum and drum ribs.
Clean operating screen and housing
CAUTION!
Do not use furniture cleaners or aggressive cleaning agents to clean the machine.
Use a damp cloth to wipe down the operating screen and housing.
What to do if ...
Troubleshooting by yourself
Problem
1)
Possible cause
Remedy
Dryer does not
work.
Dryer not connected to mains supply.
Plug in at mains socket. Check fuse in
fuse box (domestic installation).
Loading door opened.
Close loading door
The START PAUSE button not pressed.
Press the START PAUSE button.
Unsatisfacto
-
ry drying re
-
sults.
Incorrect programme set.
Set suitable programme.
2)
Fluff filters clogged.
Clean fluff filters.
3)
80
What to do if ...
