Please ensure that when the appliance is installed, it is easily accessible for the engineer in
the event of a breakdown.
Carefully level by screwing the adjustable feet in or out. Never place cardboard, wood or
similar materials under the machine to compensate for any unevenness in the floor.
Installation on suspended flooring
Suspended wooden floors are particularly susceptible to vibration.
To help prevent vibration we recommend you place a waterproof wood panel, at least 15
mm thick under the appliance, secured to at least 2 floor beams with screws, the wood
panel must extend beyond the front feet.
If possible install the appliance in one of the corners of the room, where the floor is more
stable.
WARNING!
The appliance should NOT be placed on deep pile carpeting.
Note!
Please ensure that when the appliance is installed it is easily accessible for the engineer in
the event of a breakdown.
Water inlet
The inlet hose is supplied with the appliance and can be found inside the machine drum.
This appliance must be connected to a cold water supply.
Do not use the hose from your previous machine to connect to the water supply.
1.
Open the porthole and extract the inlet
hose.
2.
Connect the hose with the angled con
-
nection to the machine back.
Do not place the inlet hose downwards.
Angle the hose to the left or right depend
-
ing on the position of your water tap.
40
Installation
Содержание LAVAMAT 14840
