AEG LAVAMAT 14840, Руководство пользователя

Страница: 35 / 48

Problem Possible cause/Solution
The machine vibrates is
noisy:
The transit bolts and packing have not been removed.
• Check the correct installation of the appliance.
The support feet have not been adjusted
• Check the correct levelling of the appliance.
The laundry is not evenly distributed in the drum.
• Redistribute the laundry.
Maybe there is very little laundry in the drum.
• Load more laundry.
Spinning starts late or the
machine does not spin:
The electronic unbalance detection device has cut in because the
laundry is not evenly distributed in the drum. The laundry is redis -
tributed by reverse rotation of the drum. This may happen several
times before the unbalance disappears and normal spinning can
resume. If, after 10 minutes, the laundry is still not evenly distrib -
uted in the drum, the machine will not spin. In this case, redistrib -
ute the load manually and select the spin programme.
• Redistribute the laundry.
The load is too small.
• Add more items, redistribute the load manually and then select
the spinning programme.
The machine does not dry or
does not dry properly:
The drying time has not been selected.
• Select the drying time.
The water tap is not turned on. (E10)
• Open the water tap.
The drain filter is clogged. (E20)
• Clean the drain filter.
The machine is overloaded.
• Reduce the laundry load.
The selected drying time was not suitable for the laundry.
• Select the suitable drying time for the laundry.
The machine makes an un -
usual noise:
The machine is fitted with a type of motor which makes an un -
usual noise compared with other traditional motors. This new mo -
tor ensures a softer start and more even distribution of the laun -
dry in the drum when spinning, as well as increased stability of
the machine.
No water is visible in the
drum:
Machines based on modern technology operate very economically
using very little water without affecting performance.
What to do if… 35