AEG LAVAMAT 14840, Руководство пользователя

Страница: 15 / 48

Select the STAIN option (Button 5)
Select this option to treat heavily soiled or stained laundry with stain remover (extended
main wash with time optimised stain action phase). The relevant light will light up.
This option
is not
available with a temperature lower than 40°C.
If you wish to perform a programme with the stain option, pour stain remover into com -
partment .
Select the TIME SAVING option (Button 6)
This option allows you to modify the washing time, automatically proposed by the appli -
ance.
By pressing this button you can select the following options:
DAILY: by pressing button 6 once, the relative pilot light comes on and the washing dura -
tion will be reduced to wash daily soiled laundry.
SUPER QUICK: by pressing button 6 twice, the relative pilot light remains lit, the washing
duration will be reduced to wash lightly soiled laundry or items that have been used or
worn for a short time. On the display will be visualized the decreased washing time.
Select an additional rinse (EXTRA RINSE)
This appliance is designed for saving water. However, for people with a very delicate skin
(allergic to detergents) it may be necessary to rinse the laundry using an extra quantity of
water (extra rinse).
Press simultaneously button 2 and 3 for a few seconds: the light C comes on. This function
stays permanently on. To remove it press the same buttons again until the light
C
goes off.
Press the START/PAUSE (Button 8)
Press the button 8 to start the programme. The corresponding red pilot light stops blinking.
The pilot light
A
or the pilot light
B
is on.
Press the button 8 to interrupt a programme which is running. The corresponding red pilot
light starts blinking.
Press the button 8 again to restart the programme from the point at which it was interrup -
ted
If you have chosen a delayed start with button 9 , the machine will begin the countdown.
If you set an incorrect option, the yellow pilot light of the button
8
blinks for 3 times. The
display shows the message Err for some seconds.
Set the DELAY START (Button 9)
Press this button repeatedly to select the required delay before you press the button 8 to
start the programme.
The display shows the set delay time value (up to 20 hours) for some seconds, then it shows
the duration of the programme again.
You can delay the wash programme can be delayed from 30 min - 60 min - 90 min, 2 hours
and then by 1 hour up to a maximum of 20 hours.
Adding items after you have set the delay:
Throughout the delay time the door will be locked.
• Press the button
8
to put the machine in pause
• Add the laundry, close the door .
• Press the button
8 again.
Daily use 15