4.
Slide out the relevant plastic spacers.
5.
Fill the smaller upper hole and the two
large ones with the corresponding plas
-
tic plug caps supplied in the bag con
-
taining the instruction booklet.
Positioning and levelling
Install the machine on a flat hard floor.
Make sure that air circulation around the machine is not impeded by carpets, rugs etc.
Before placing it on small tiles, apply a rubber coating.
Never try to correct any unevenness in the floor by putting pieces of wood, cardboard or
similar materials under the machine.
If it is impossible to avoid positioning the machine next to a gas cooker or coalburning
stove, an insulating panel covered with aluminium foil on the side facing the cooker or
stove, must be inserted between the two appliances.
The machine must not be installed in rooms where the temperature can drop below 0°C.
The water inlet hose and the drain hose must not be kinked.
Please ensure that when the appliance is installed, it is easily accessible for the engineer in
the event of a breakdown.
36
Installation
Содержание LAVAMAT 11842 VIT
Страница 85: ...85 ...
Страница 86: ...86 ...
Страница 87: ...87 ...
Страница 88: ...www aeg com shop 132938760 B 092011 ...