AEG L8WBC61S, Руководство пользователя

Страница: 31 / 48

• In the display comes on.
• The indicator of button Start/Pause
goes off. The door locked goes
off
• Press the button On/Off for some
seconds to deactivate the appliance.
After some minutes from
the end of the
programme, the energy
saving function
deactivates the appliance
automatically.
1. Remove the laundry from the
appliance.
2. Make sure that the drum is empty.
After drying phase, clean the
drum, the seal and the inside
of the door with a wet cloth.
12.
DAILY USE - DRYING ONLY
WARNING!
Refer to Safety chapters.
This appliance is an
automatic washer dryer.
12.1 Preparation to drying
1.
Press the On/Off button for some
seconds to activate the appliance.
With a drying-only
programme the display does
not show the laundry weight
and the PROSENSE
estimation is deactivated.
2.
Load the laundry one item at a time.
3. Turn the programme dial to the
programme suitable for the items to
dry.
4.
Tap on the Mode button twice to
exclude washing and perform drying
only. The Dry indicator is on. The
indicators and appear on
the display.
When drying a big amount
of laundry, to have good
drying performances, make
sure that the laundry itself is
not rolled up and that is
uniformly distributed in the
drum.
12.2 Drying - Automatic levels
1. Tap on the Drying Levels button
repeatedly until the display shows
the required dryness level. The
indicators in the display illuminate
accordingly:
a. Iron dry : for cotton
items;
b. Cupboard dry : for
cotton and synthetic items;
c. Extra dry : for cotton
items.
The display shows the drying
programme duration.
To have a good drying by
using less energy and in a
shorter time, the appliance
does not let you set a too
low spin speed for the items
to be washed and dried.
2. Touch button Start/Pause to start the
programme.
In the display the door locked
indicator goes on, the indicator of the
running phase starts flashing.
The display also shows the remaining
programme time.
12.3
Timed Drying
1. Tap on the button Timed drying
repeatedly to set the desired time
value (see the "Timed drying" table
the "Programmes" chapter). The
drying level indicator goes off and
the indicator
comes on.
ENGLISH 31