AEG L8WBC61S, Руководство пользователя

Страница: 30 / 48

11.1 NON-STOP programme -
Wash and dry
Not all programmes are
compatible with drying
function. The NonStop
OKOPower programme is
already a complete
wash&dry programme.
You can wash and dry your laundry
setting a «non stop-programme».
Proceed as follows:
1. Press the On/Off button for some
seconds to activate the appliance.
2. Turn the programme dial to the
desired washing programme. The
display shows the default
temperature and spin. If necessary,
change them according to your
laundry. The display also shows the
maximum recommended load for
washing phase.
3. Set the desired options, if there are
available.
4. Touch the Mode button once to
activate also the drying function. The
Wash and Dry indicators come on.
The indicators and
appear on the display. The display
also shows the maximum
recommended load for a washing
and drying programme (e.g. 6 kg for
cottons).
5. Open the door and load the laundry
one item at a time. On the display
the weight of the laundry is updated
by steps of kg 0.5 and the
programme duration is updated
accordingly.
6.
Close the door.
7. Put the detergent and the additives
in the appropriate compartment.
11.2 Washing and Drying -
Automatic levels
1.
Tap on the Drying Levels button
repeatedly until the display shows
the required dryness level. The
indicators in the display illuminate
accordingly:
a. Iron dry : for cotton
items;
b. Cupboard dry : for
cotton and synthetic items;
c. Extra dry : for cotton
items.
The time value on the display is the
duration of both cycles washing and
drying.
To have a good drying by
using less energy and in a
shorter time, the appliance
does not let you set a too
low spin speed for the items
to be washed and dried.
2. Touch button Start/Pause to start the
programme. The PROSENSE
estimation starts.
In the display the door locked
indicator goes on, the indicator of the
running phase starts flashing.
The display also shows the remaining
programme time.
11.3 Washing and Timed
Drying
1. Tap on the button Timed drying
repeatedly to set the desired time
value (see the "Timed drying" table
the "Programmes" chapter). The
drying level indicator goes off and
the indicator
comes on.
Each time you tap on this button the
time value increases by 5 minutes. The
display shows the set new time value.
2. Touch the Start/Pause to start the
programme. The PROSENSE
estimation starts.
In the display the door locked
indicator comes on and the indicator of
the running phase starts flashing.
The display also shows the remaining
programme time.
11.4
At the end of the drying
programme
• The appliance stops automatically.
• The acoustic signals operate (if they
are active).
www.aeg.com 30