AEG L6WEJ841N, Руководство пользователя

Страница: 24 / 44

A short tune sounds.
10.5 Setting a programme
1. Turn the programme knob and set
the programme:
• The related programme indicator
comes on.
• The indicator of Start/Pause
flashes.
• The display shows: the default
temperature, the spin speed and
the programme duration.
2. If necessary, change the
temperature, the spin speed or add
available options. When you activate
an option, the indicator of the set
option comes on.
In case a selection is not
possible, no indicator
comes on and an acoustic
signal sounds.
10.6 Starting a programme
without the delay start
Press the Start/Pause button to start the
programme.
The relevant indicator stops to flash and
stays on.
The programme starts, the door is
locked. The display show the indicator
.
The drain pump can operate
for a short time when the
appliance fills water.
10.7 The ProSense System
load detection
After touching the Start/Pause button:
1. The ProSense System starts
estimating the weight of the load to
calculate the real programme
duration. During this phase the two
dots separating hours from minutes
are blinking.
2. After about 15-20 minutes new cycle
duration is displayed.
The appliance automatically adjusts
the programme duration to the load
to achieve perfect washing results in
the minimum possible time.
10.8 Starting a programme
with the delay start
1. Press the Delay Start button again
and again until the display shows the
number of minutes or hours of delay.
The related indicator comes on.
2. Press the Start/Pause button.
The appliance starts the countdown of
the delay start.
When the countdown is completed, the
programme starts automatically.
Before you press the Start/
Pause button to start the
appliance, you can cancel or
change the set of the delay
start.
10.9 Cancelling the delay
start
To cancel the delay start:
1. Press the Start/Pause button to set
the appliance to pause.
The related indicator flashes.
2. Press the Delay Start button
repeatedly until the display shows .
3. Press the Start/Pause button again to
start the programme immediately.
10.10 Interrupting a
programme and changing a
option
You can change only some options
before they operate.
1. Press the Start/Pause button.
The related indicator flashes.
2. Change the option set.
3. Press the Start/Pause button again.
The programme continues.
10.11 Cancelling a running
programme
1. Press the On/Off button to cancel the
programme and to deactivate the
appliance.
2. Press the On/Off button again to
activate the appliance.
Now, you can set a new washing
programme.
www.aeg.com 24