AEG L6WEJ841N, Руководство пользователя

Страница: 26 / 44

11. DAILY USE - WASHING & DRYING
WARNING!
Refer to Safety chapters.
This appliance is an
automatic washer dryer.
11.1 Wash and dry combined
programme
1. Press the On/Off button for some
seconds to activate the appliance.
2. Load the laundry one item at a time.
To have a good drying
performance do not exceed
the maximum drying loads
recommended in the user
manual. Do not set a spin
speed lower than the
automatic speed of the set
programme.
3. Put the detergent and the additives in
the appropriate compartment.
4. Turn the programme dial to the
washing programme.
The display shows the indicators of the
different washing phases.
5. Set the available options.
The NonStop programme is
already a complete wash&
dry programme and it is not
necessary to set the
Dryness Level or the Time
Drying .
11.2 Washing & Automatic
drying
1. Press the Dryness Level button again
and again until the display shows one
of the dryness level indicator:
• Iron Dry;
• Cupboard Dry option;
• Extra Dry option.
The display shows the indicator . The
time value on the display is the duration
of the w drying cycles,
calculated on a default load size.
To have a good drying the
appliance does not let you
set a too low spin speed for
the items to be washed and
dried.
2. Press the Start/Pause button to start
the programme.
In the display the indicator of the set
dryness level stays on.
The door locked indicator
goes on.
The display shows regularly a new time
value.
The last minutes of the
drying cycle the appliance
performs the anti-crease and
the cooling phases.
11.3 Washing & Timed Drying
To have a good drying the appliance
does not let you set a too low spin speed
for the items to be washed and dried.
1. Press the Time Drying button to set
the drying time value. The display
shows 10 minutes.
The indicator comes on in the
display. The display shows the set drying
value time. for example:
. After some
seconds the display shows the final time
value
, that is the total duration of
the washing and drying cycles (washing
+ anti- cooling phases).
If you set only 10 minutes of
drying after washing, the
appliance calculates also the
duration of the anti-crease
and the cooling phases.
2. Press the Start/Pause button to start
the programme.
In the display the indicator comes
on. The door is locked. The display
shows regularly a new time value.
11.4 End of the programme
The appliance stops automatically. The
acoustic signals operate (if they are
active).
www.aeg.com 26