Installation and connection instructions
47
Water inflow
A pressure hose 1.5m in length is supplied.
If a longer inflow hose is required, only a VDE-approved, complete set
of hoses with fitted hose screw connections offered by our Customer
Service is permissible.
–
Hose sets in lengths of 2.2m, 3.5m and 5m are available for washing
machines without Aqua-Control.
–
Hose sets in lengths of 2.0m, 2.9m and 3.9m are available for wash-
ing machines with Aqua-Control.
Caution!
Never cut into pieces in order to extend the hoses!
3
Sealing rings are supplied either in the plastic
nuts of the hose screw connection or in the enc-
losed pack. Do not use other seals!
0
1.
Connect the hose with the angled connection to
the machine.
Caution!
–
Do not lay the infeed hose ver-
tically downwards. Instead, turn
it to the right or left as shown
in the diagram.
–
Tighten the hose connection
only by hand.
2.
Connect the hose with the straight connection
to a water tap with a R 3/4 (inch) screw thread.
Caution!
Only tighten the screw connection ma-
nually.
3.
By slowly opening the water tap before putting
the washing machine into operation, check that
the connection is free of leaks.
Содержание KO-LAMAVAT 76730
Страница 1: ...ÖKO LAVAMAT 76730 update The environmentally friendly washing machine User information ...
Страница 53: ...53 ...