4.
DAILY USE
WARNING!
Refer to Safety chapters.
4.1
Activating and
deactivating
Touch for 1 second to activate or
deactivate the hob.
4.2
Automatic Switch Off
The function deactivates the hob
automatically if:
• All cooking zones are deactivated.
• You do not set the heat setting after
you activate the hob.
• You spill something or put something
on the control panel for more than 10
seconds (a pan, a cloth, etc.). An
acoustic signal sounds and the hob
deactivates. Remove the object or
clean the control panel.
• The hob gets too hot (e.g. when, a
saucepan boils dry). Let the cooking
zone cool down before you use the
hob again.
• You use incorrect cookware. The
symbol
?
comes on and the cooking
zone deactivates automatically after 2
minutes.
• You do not deactivate a cooking zone
or change the heat setting. After
some time, the hob deactivates. See
below.
The relation between heat setting and
times of the function:
•
,
1
—
3
— 6 hours
•
4
—
7
— 5 hours
•
8
—
9
— 4 hours
•
10
—
14
— 1.5 hours
4.3
Selecting language
To change the language, start the hob
with and then touch
. Set the
language menu with arrows. Touch
to confirm. The display shows the list of
languages. Touch
or
to set the
language. Touch
to confirm.
4.4
The heat setting
To set or change the heat setting:
Touch the control bar at the correct heat
setting or move your finger along the
control bar until you reach the correct
heat setting.
4.5
Using the cooking zones
Put the cookware on the cross / square
which is on the surface that you cook.
Cover the cross / square fully. Induction
cooking zones adapt to the dimension of
the bottom of the cookware
automatically. You can cook with the
large cookware on two cooking zones at
the same time.
4.6
Automatic Heat Up
If you activate this function you can get a
necessary heat setting in a shorter time.
The function sets the highest heat setting
for some time and then decreases to the
correct heat setting.
To activate the function the
cooking zone must be cold.
To activate the function for a cooking
zone:
touch . Immediately touch the
correct heat setting.
A
comes on.
To deactivate the function:
change the
heat setting.
4.7
Power Boost
This function makes more power
available to the induction cooking zones.
ENGLISH
9