AEG GYB00416DT, Инструкция по установке и эксплуатации

Страница: 36 / 64

34 www.aeg.com
4. INSTALLATION
4.1 Important installation information
• Read and follow all instructions in the SAFETY INFORMATION section.
• Refer to the separate manuals supplied with the other components for more
relevant information.
4.2 Before installation
step action
1 Make sure that you have the following installed in your kitchen cabinet
(see image 3):
• Discharge pipe with siphon (Ø 40 mm)
• Earthed AC wall socket (with 16A fuse)
• Cold water supply (with water of drinking water quality and with a
3/8” outer thread)
• Warm water supply (with a 3/8” outer thread). If not available you
need to follow the instructions for the combi configuration.
2 Rinse all supplied hoses with water thoroughly
4.3 Installing the appliance
step action
1
Determine which configuration you are going to install.
The appliance is available for 2 different configurations:
• Solo situation (see image 4)
• Combi situation (see image 5)
The solo configuration supplies only boiling water. Warm water comes
from the central boiler.
The combi configuration supplies both boiling and warm water.
2 make sure you have all components.
If you install the solo configuration:
– Make sure you have the following components: A, B, C and E
(optional). Make sure everything is complete and that no parts are
missing (see image 1).
If you install the combi configuration:
– Make sure you have the following components: A, B, C, D and E
(optional). Make sure everything is complete and that no parts are
missing (see image 1).