The XtraDry option is a permanent
option for all programmes other than
ECO 50° and need not to be selected at
every cycle.
Every time ECO 50° is activated, XtraDry
option is off and needs to be chosen
manually. In other programmes, the
setting of XtraDry is permanent and it is
automatically used in next cycles. This
configuration can be changed at any
time.
Activating XtraDry option deactivates
TimeSaver.
7.4
TimeSaver
This option increases the pressure and
the temperature of the water.
The washing and drying phases are
shorter. The total programme duration
decreases by approximately 50%.
The washing results are the same as with
the normal programme duration but the
drying results can be less satisfactory.
The TimeSaver option is not applicable
to all programmes.
1.
Scroll through the programme list
and select a programme.
2.
Press the
OK
key to confirm.
If the TimeSaver option is applicable to
the selected programme, the display
shows the 2 conditions Fast and Normal
and the programme duration for each
condition:
• Fast: TimeSaver activated. Press
the
OK
key to confirm.
• Normal: TimeSaver deactivated.
Press the
OK
key to confirm.
7.5
Child lock
This option prevents children to play with
the keys on the control panel while a
programme is running or when the
appliance is activated and ready for use.
If you activate the Child lock option while
the programme ECO is running, the
option AirDry is automatically
deactivated.
Press at the same time the
Program
and
the
Back
keys.
The display shows the message that the
Child lock option is active.
To deactivate the Child lock option,
repeat the procedure.
8.
BEFORE FIRST USE
The first time you activate the appliance
it is necessary to set the language.
Default language is English.
1.
Set the language.
• Press
OK
to confirm English.
• Scroll the list of available
languages for a new language
and press
OK
to confirm.
2. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If
not, adjust the level of the water
softener.
3.
Fill the salt container.
4.
Fill the rinse aid dispenser.
5.
Open the water tap.
6.
Start a programme to remove any
processing residuals that can still be
inside the appliance. Do not use
detergent and do not load the
baskets.
When you start a programme, the
appliance can take up to 5 minutes to
recharge the resin in the water softener.
It seems that the appliance is not
working. The washing phase starts only
after this procedure is completed. The
procedure will be repeated periodically.
8.1
The water softener
The water softener removes minerals
from the water supply, which would have
a detrimental effect on the washing
results and on the appliance.
The higher the content of these minerals,
the harder your water is. Water hardness
is measured in equivalent scales.
The water softener should be adjusted
according to the hardness of the water in
your area. Your local water authority can
advise you on the hardness of the water
ENGLISH
13
