AEG CD740SV, Руководство пользователя

Страница: 26 / 64

Food category: casserole
1. Activate the appliance.
2. Place half of the ingredients in a
baking dish.
3.
Insert the tip of the food sensor
exactly in the centre of the casserole.
The food sensor should be stabilized
in one place during baking. Use a
solid ingredient to achieve that. Use
the rim of the baking dish to support
the silicone handle of the food
sensor. The tip of the food sensor
should not touch the bottom of a
baking dish.
4. Cover the food sensor with the
remaining ingredients.
5. Put the plug of the food sensor into
the socket located in the front frame
of the appliance.
The display shows the food sensor
symbol.
6. Press or in less than 5
seconds to set the food core
temperature.
7. Set a heating function and, if
necessary, the oven temperature.
8. To change the food core
temperature, press .
When the dish is at the set temperature,
an acoustic signal sounds. The appliance
deactivates automatically.
9. Touch any symbol to stop the signal.
10. Remove the food sensor plug from
the socket and remove the dish from
the appliance.
WARNING!
There is a risk of burns as the
food sensor becomes hot.
Be careful when you unplug
it and remove it from the
food.
9.2 Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
Deep pan:
Push the deep pan between the guide
bars of the shelf support.
Wire shelf and the deep pan together:
Push the deep pan between the guide
bars of the shelf support and the wire
www.aeg.com 26