When the cleaning is completed, do the
above steps in the opposite sequence.
Install the smaller panel first, then the
larger and the door.
WARNING!
Make sure that the glasses
are inserted in the correct
position otherwise the
surface of the door may
overheat.
Make sure that you put the glass panels
(C, B and A) back in the correct
sequence. First, insert panel C, which has
a square printed on the left side and a
triangle on the right side. You will also
find those symbols embossed on the
door frame. The triangle symbol on the
glass must match the triangle on the
door frame, and the square symbol must
match the square. After that insert the
other two glass panels.
A B C
12.6
Replacing the lamp
WARNING!
Risk of electric shock.
The lamp can be hot.
1.
Turn off the oven.
Wait until the oven is cooled down.
2.
Disconnect the oven from the mains.
3.
Put a cloth on the bottom of the
cavity.
The top lamp
1.
Turn the lamp glass cover to remove
it.
2.
Clean the glass cover.
3.
Replace the lamp with a suitable 300
°C heat-resistant lamp.
4.
Install the glass cover.
The side lamp
1.
Remove the left shelf support to get
access to the lamp.
2.
Use a narrow, blunt object (e.g. a
teaspoon) to remove the glass cover.
3.
Clean the glass cover.
4.
Replace the lamp with a suitable 300
°C heat-resistant lamp.
5.
Install the glass cover.
6.
Install the left shelf support.
13.
TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
www.aeg.com
42
Содержание BPE642020M
Страница 1: ...USER MANUAL EN User Manual Oven BPE642020M BPK642020M ...
Страница 47: ...ENGLISH 47 ...
Страница 48: ...www aeg com shop 867336432 C 152019 ...