After 2 seconds the procedure starts.
To change the default length of the procedure (
P1
or
P2
), press to set
, and then
press or to set the length of the pyrolytic procedure.
You can use the End function to delay the start of the cleaning procedure.
When the oven is at its set temperature, the door locks. The symbol and the bars of the
heat indicator come up until the door unlocks again.
During the pyrolytic cleaning the lamp is off.
Cleaning reminder
To remind you that the pyrolytic cleaning is necessary,
PYR
flashes in the display for 10
seconds after each activation and deactivation of the appliance.
The cleaning reminder goes out:
• After the end of the Pyrolytic cleaning function.
• If you press and at the same time.
Shelf support
You can remove the shelf support to clean the side walls.
Removing the shelf support
1.
Pull the front of the shelf support away
from the side wall.
2.
Pull the shelf support from the back of
the side wall to remove it.
To install the shelf support follow the proce-
dure in reverse.
Valid with telescopic runners:
The retaining pins on the telescopic shelf
runners must point to the front!
1
2
28
Care and cleaning
Содержание BP5023001
