AEG BHPV18, Оригинальное руководство пользователя

Страница: 15 / 20

15
15
Protect your lungs. Wear a face or dust mask if the operation is dusty. Following
this rule will reduce the risk of serious personal injury.
Do not use the product to spray chemicals. Your lungs can be damaged by
inhaling toxic fumes.
Risk of bursting. Carefully monitor objects during inflation.
To reduce the risk of over inflation, use a reliable pressure gauge periodically
during inflation. The pressure gauge on the inflator is for reference only and is
therefore not binding for exact values.
Allow the product to cool for ten (10) minutes after every ten (10) minutes of
continuous use. Never block the inflating or deflating outlets while operating.
Remove the battery pack before starting any work on the product.
Do not dispose of used battery packs in the household refuse or by
burning them.
AEG Distributors offer to retrieve old batteries to protect our
environment.
Do not store the battery pack together with metal objects (short circuit
risk).
Use only System AEG chargers for charging System AEG battery packs. Do
not use battery packs from other systems.
Battery acid may leak from damaged batteries under extreme load or
extreme temperatures. In case of contact with battery acid wash it off
immediately with soap and water.
In case of eye contact rinse thoroughly for
at least 10 minutes and immediately seek medical attention.
Ambient temperature range for tool during operation is between 0°C and 40°C.
Ambient temperature range for tool storage is between 0°C and 40°C.
The recommended ambient temperature range for the charging system during
charging is between 10°C and 38°C.
RESIDUAL RISKS
Even when the product is used as prescribed, it is still impossible to completely
eliminate certain residual risk factors. The operator should pay particular and
additional attention to these points in order to reduce the risk of serious personal
injury.
Ŷ
Use the product only for its intended use. Do not alter or modify the product
from the original design or function.
Ŷ
Always be aware that misuse and improper handling of the product can
cause injury to yourself and others.
Ŷ
Never leave the product unattended with the nozzle attached to the item
being inflated.
Ŷ
Do not continue to use the product or nozzle which leaks air or does not
function properly.
Ŷ
Risk of inflatable bursting.
–
Do not operate the product to result in output pressure greater than
marked maximum pressure of item to be inflated.
–
Carefully monitor objects during inflation to reduce the risk of over
inflation. Use a reliable pressure gauge periodically during inflation.
SPECIFIED CONDITIONS OF USE
The multi inflator may be used for the following applications.
Ŷ
Inflating high pressure items like motorbike/car/bicycle tyres and sport
equipment.
Ŷ
Inflating and deflating low pressure items like air mattresses, pool inflatables
and rafts.
Do not use the product for any other purpose.
BATTERIES
Battery packs which have not been used for some time should be recharged
before use.
Temperatures in excess of 50°C (122°F) reduce the performance of the battery
pack. Avoid extended exposure to heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum life-time, the battery packs have to be fully charged, after used.
To obtain the longest possible battery life remove the battery pack from the
charger once it is fully charged.
For battery pack storage longer than 30 days:
s
Store the battery pack where the temperature is below 27°C and away from
moisture.
s
Store the battery packs in a 30% - 50% charged condition.
s
Every six months of storage, charge the pack as normal.
ADDITIONAL BATTERY SAFETY WARNINGS
WARNING! To reduce the risk of fire, personal injury, and product damage
due to a short circuit, never immerse your tool, battery pack or charger in fluid or
allow a fluid to flow inside them. Corrosive or conductive fluids, such as seawater,
certain industrial chemicals, and bleach or bleach containing products, etc., can
cause a short circuit.
Ambient temperature range for battery during use is between 0°C and 40°C.
Ambient temperature range for battery storage is between 0°C and 27°C.
TRANSPORTING LITHIUM BATTERIES
Lithium-ion batteries are subject to the Dangerous Goods Legislation
requirements.
Transportation of those batteries has to be done in accordance with local,
national and international provisions and regulations.
Ŷ
The user can transport the batteries by road without further requirements.
Ŷ
Commercial transport of lithium-ion batteries by third parties is subject
to Dangerous Goods regulations. Transport preparation and transport
are exclusively to be carried out by appropriately trained persons and the
process has to be accompanied by corresponding experts.
When transporting batteries:
Ŷ
Ensure that battery contact terminals are protected and insulated to
prevent short circuit.
Ŷ
Ensure that battery pack is secured against movement within packaging.
Ŷ
Do not transport batteries that are cracked or leak.
Check with forwarding company for further advice.
BATTERY PACK PROTECTION
The battery pack has overload protection that protects it from being overloaded
and helps to ensure long life. Under extreme stress the battery electronics
switch off the product automatically. To restart, switch the product off and then
on again. If the product does not start up again, the battery pack may have
discharged completely. In this case it must be recharged in the battery charger.
THERMAL OVERLOAD PROTECTION
Overheated cells will reduce performance, run time and life. Overheating
can occur from battery packs being exposed to very hot environments or
from the tool they are powering being over-worked. The control electronics
will automatically shut down the battery pack to protect the cells which in
turn protects the electronics and motor within the tool. The battery pack will
automatically shut itself down again should the temperature condition remain
high when the trigger is pulled again. The system will continue to shut the
battery pack down until the temperature is returned to a safe operating level.
CURRENT OVERLOAD PROTECTION
The control electronics will instantly shut down the battery back when excessive
current draw is detected - protecting both the battery cells and the motor of the