AEG A18DPC, Оригинальное руководство пользователя

Страница: 7 / 12

7
CHARGER SAFETY WARNINGS
The product is not intended to be used or cleaned by persons
with reduced physical, sensory or mental capabilities, or lack of
experience or knowledge, unless they have been given instructions
concerning the safe use of the appliance by a person legally
responsible for their safety. They should be supervised whilst using
the product. Children shall not use, clean or play with the product,
which when not in use should be secured out of their reach.
Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or
serious injury.
Do not recharge primary cells (non-rechargeable).
The product must not be damp and should never be used in a
damp environment.
The product is for indoor use only.
Do not cover any ventilation slots, and provide adequate ventilation
during operation.
Mains voltage must correspond with the voltage specifications on
the product.
Before using the product, check that the charger enclosure, cable,
and plug are not damaged. If damage is found, do not use the
product and bring it to an authorised service centre for repair.
Do not use the product if it has suffered any heavy shock or jolting,
or if it is damaged in any other way.
When charging, do not expose the product to sunlight or other heat
source. The recommended temperature range at charging vicinity
is 5° to 40°C.
Due to the heat generated during charging, do not use the product
on a combustible surface.
Do not use the product near flammable materials, such as cloth,
packaging materials, paint, spray paint or aerosols, lubricants,
thinners, petrol containers, gas containers, or gas appliances.
Never modify, disassemble, or attempt to repair the product
yourself.
Do not allow the charger or battery packs to become contaminated
with any material that could be conductive, such as metallic
particles from grinding, cutting, or machining processes.
Protect the battery contact terminals from metallic objects to avoid
a short circuit, which can cause fire or explosion.
Unplug the product from the power socket when it is not in use or
when cleaning it.
Use only an extension cable that is approved and in good
condition.
Do not charge battery packs that show signs of leaks. Dispose of
them properly.
Never charge a damaged battery pack. Replace damaged battery
packs immediately.
Before every use, examine the supply cord for damage. If there are
signs of damage, it must be replaced by a qualified person at an
authorised service centre to avoid a hazard.
ADDITIONAL BATTERY SAFETY WARNINGS
WARNING! To reduce the risk of fire, personal injury, and
product damage due to a short circuit, never immerse your tool,
battery pack, or charger in fluid or allow fluid to flow inside them.
Corrosive or conductive fluids, such as seawater, certain industrial
chemicals, and bleach or bleach containing products, etc., can
cause a short circuit.
Do not dispose of used battery packs in the household refuse or
by burning them. AEG distributors offer to retrieve old batteries to
protect our environment.
Battery packs that have not been used for some time should be
recharged before use.
For an optimum lifetime, the battery packs have to be fully charged
after use.
For battery pack storage longer than 30 days:
• Store the battery pack where the temperature is below 27°C and
away from moisture.
• Store the battery packs in a 30% - 50% charged condition.
• Every six months of storage, charge the pack as normal.
TECHNICAL DATA A18DPC
Type Charger
Rated voltage 18 V
Quick charge current 4.0 A
Recommended ambient charging temperature +5 to +40 °C
Weight without battery pack 1.38 kg
COMPATIBLE BATTERY PACKS
Battery pack Voltage Battery capacity Number of cell for battery Cell type
Approximate charge
time
L1820R TYPE II
18 V
≤ 2.0 Ah 5
Lithium-Ion
40 minutes
L1820S ≤ 2.0 Ah 5 40 minutes
A18FB2 ≤ 2.0 Ah 5 40 minutes
L1825R TYPE II ≤ 2.5 Ah 5 45 minutes
L1830R-X5 ≤ 3.0 Ah 5 55 minutes
L1840R TYPE II ≤ 4.0 Ah 5 x 2 70 minutes
A18B4 ≤ 4.0 Ah 5 x 2 70 minutes
A18FB4 ≤ 4.0 Ah 5 x 2 70 minutes
L1850R TYPE II ≤ 5.0 Ah 5 x 2 85 minutes
A18FB5 ≤ 5.0 Ah 5 x 2 85 minutes
L1860R TYPE II ≤ 6.0 Ah 5 x 2 105 minutes
L1860R-X5 ≤ 6.0 Ah 5 x 2 105 minutes
L1890R ≤ 9.0 Ah 5 x 3 160 minutes