10
Contents - Operation - for users and contractors
OPERATION
1.
General information
.................................................. 10
2.
Safety
.......................................................................... 10
3.
Appliance description
............................................... 11
4.
Operation
.................................................................... 11
5.
Cleaning, care and maintenance
............................. 11
6.
What to do if ...
........................................................... 11
INSTALLATION
7.
Safety
.......................................................................... 12
8.
Appliance description
............................................... 12
9.
Installation
.................................................................. 12
10.
Commissioning
.......................................................... 13
11.
Taking the appliance out of use
............................... 13
12.
Recommissioning
...................................................... 14
13.
Appliance handover
.................................................. 14
14.
Troubleshooting
........................................................ 14
15.
Maintenance
............................................................... 14
16.
Specification
.............................................................. 15
WARRANTY
ENVIRONMENT AND RECYCLING
OPERATION
1.
General information
1.1
Document information
The chapter entitled “Operation” is intended for the appli-
ance user and the heating contractor.
The chapter entitled “Installation” is intended for the heat-
ing contractor.
Please read
Read these instructions carefully before using the
appliance and retain them for future reference. If the
appliance is passed on to a third party, please hand
these instructions to the new user.
1.2
Key to symbols
Symbols in this documentation
In these instructions you will come across symbols and
highlights. These have the following meaning:
Risk of injury
Risk to life through electrocution!
Risk of scalding or burns
!
Possible damage
Information concerning damage to the appliance,
environmental damage or material losses.
Please read
Text next to this symbol is particularly important.
» These passages and the „»“ symbol indicate that you
have to do something. The action you need to take is
described step by step.
Symbols on the appliance
Disposal
Appliances with this marking are not suitable for
general waste disposal, and should therefore be dis
-
posed of separately.
Units of measurement
All measurements are given in mm unless stated other-
wise.
2.
Safety
2.1 Intended use
This appliance is designed for heating domestic hot water.
It can be connected in two different ways:
» As a sealed unvented (pressurised) water heater for
supplying one or several draw-off points.
» As an open vented (unpressurised) water heater for
supplying one draw-off point.
This appliance is designed for domestic use. It can be
used safely by untrained persons. The appliance can also
be used in a non-domestic environment, e.g. in a small
business, as long as it is used in the same way.
Any other use beyond that described shall be deemed
inappropriate. Observation of these instructions is also
part of the correct use of this appliance. Any modifications
or conversions to the appliance void all warranty rights.
2.2
Safety information
Risk of scalding
The taps can reach temperatures above 43 °C.
WARNING Injury
The appliance may be used by children aged 8 and
up and persons with reduced physical, sensory or
mental capabilities or a lack of experience provided
that they are supervised or they have been instruct
-
ed on how to use the appliance safely and have un
-
derstood the resulting risks.
Children must never
play with the appliance.
Children must never clean
the appliance or perform user maintenance unless
they are supervised.
!
Possible water damage
– Pressurised connection:
Expansion water can cause water damage if the
blow-off line of the safety valve is closed off. There
-
fore never close off the blow-off line.
– Unpressurised connection:
The tap outlet has a ventilation function. Do not
subject the appliance to pressure. Never close off
the tap outlet, or use a jet controller or hose with
jet controller. Scale build-up can block the outlet
and thus subject the appliance to pressure. As a
result, the cylinder may develop leaks and cause
water damage.
2.3
CE designation
The CE designation shows that the appliance meets all
essential requirements:
◦
Electromagnetic Compatibility Directive
◦
Low Voltage Directive
Содержание 229731
