Unmanned Aircraft System
Professional
·
Advanced
- 27 -
facing leftward
6
Turn the left joystick of the remote control to
the lower right corner and the right joystick to
the lower left corner (keep this motion for 3-5s)
Place the UAV with its bottom
facing upward
Gyrosco
pe ca
lib
ration
Turn the left joystick of the remote control to the
upper left corner and the right joystick to the upper
right corner (keep this motion for about 30s)
Place the UAV horizontally
The calibration is
completed when
the UAV can be
started
C
om
pa
ss ca
lib
ra
tio
n
Turn the left joystick of the remote control to the
upper right corner and the right joystick to the
upper left corner (keep this motion for 3-5s)
First, hold the aircraft horizontally by hand and turn
horizontally for 2 circles; then, hold the aircraft vertically
by hand and turn horizontally for 2 circles. The
calibration is completed when the numeric value of
battery level indicated on the display screen of the
remote control and that on the compass change from
certain value to 0, and then change to certain value
from 0.
Notice: For outdoor flight, please make sure that the numeric value on the GPS signal strength indicator is
greater than or equal to 6; before startup of the UAV, please make sure that all switches on the remote
control are in the up position.
Throttle Calibration
First, power off the UAV, and turn the manual/auto fly switch of the remote control to the auto fly position, and push
the throttle to the highest position; power on the UAV; push the throttle to the lowest position when two “beep”
sounds are heard from the UAV; when the UAV makes six “beep” sounds, turn the manual/auto fly switch of the
remote control to the manual fly position. At this moment, throttle calibration is completed.
Notice: The throttle has been calibrated before delivery of the UAV, and recalibration is unnecessary. This
calibration is required when normal flight is influenced by inconsistent rotational speed of the four motors of
the UAV after the throttle is pushed before take-off. Before throttle calibration, please remove the propeller
blades and follow the above steps.
Содержание F100A
Страница 4: ......
