aee.com
40
V. Onboard Camera Upgrade
(1) Visit our official website www.aee.com to download the latest Condor onboard camera upgrade package.
(2) Decompress the downloaded upgrade package into two files: firmware.bin and autoexec.ash. Copy these
two files to the formatted TF card.
(3) Insert the TF card into the card slot of the onboard camera, power on the UAV with the propellers
removed, start the upgrading process, and then wait about 2min until the upgrading process is
completed. Format the TF card.
VI. Appendix
1. Common LEDs
Normal Status
The front arm LED and green rear arm LED remain on
In GPS mode
The front arm LED and yellow rear arm LED remain on
In normal mode
The front arm LED and blue rear arm LED remain on
In visual positioning mode
Alarms and Errors
The front and rear arm LEDs flash slowly
Level-1 low power alarm
The front and rear arm LEDs flash quickly
Level-2 low power alarm
The front arm LED remains on and the rear arm LED
flashes red and yellow alternately
Compass error
The front and rear (red) arm LEDs flash alternately.
Smart battery error
The above LEDs are common flight LEDs. Refer to the section Flight LEDs for more information.
2. Specifications
UAV
Battery
6,800mAh LiPo
Weight
1.68Kg (1.8Kg for Condor Elite)
Hovering accuracy
Horizontal: ±1.5m
Vertical: ±0.5m
Maximum inclination angle
20°
Maximum ascending/
descending speed
Ascend: 5m/s
Descend: 2.5m/s
Maximum flight speed
16m/s (not recommended)
Shaft distance
400mm
Flight time
≤20min
