Aeca StecaGrid 10000 3ph, Инструкция по установке и эксплуатации

Страница: 41 / 84

EN
41
737.096 | 11.37
4.4 Connecting (AC) the inverter
Danger
Risk of death by electrocution!
X
When working on the solar power system, disconnect the inverter from the AC
power supply.
X
Turn the DC switch to off.
X
Make sure that the power supply cannot be unintentionally switched back on.
4.4.1 Connecting the inverter to the AC cable
1 Turn the DC switch to off.
2 Wire the AC connector:
 The connector layout is imprinted next to the contacts or can be found in
the adjacent drawing.
3 Close the connector:

Push the connector into the housing until it clicks into place.
 Tighten the screw connection by hand.
4 To open the connector again, if necessary:
 Loosen the screw connection.

Use a screwdriver to press the locking mechanism together at the point
shown and
 push the connector out of the housing.

Phase 1
Phase 2
Phase 3
Neutral
conductor
Protective earth
conductor


