E
n
g
lis
h
14
E
n
g
lis
h
13
DVX D8 - DVX D10
DXV D8
®
The D8 bi-amped active speaker is equipped with a DIGIPRO
amplifier delivering 300W RMS for the bass section and 100W
RMS for the high frequency section.
D8 active two-way speaker features a neodymium woofer 8”
(voice coil 2,5”) and a neodymium compression driver 1”
(voice coil 1.5”) on a 90°x70° aluminium CD- horn.
The speakers’ horizontal directivity is 90° by default factory
setting.
The speaker is made of 12mm birch ply wood, the one top
handle
, the 6 flytracks, the 10 M8 threads and the 2
flypins located on the sides and the back of the speker are
enabling easy transport
and installation.
The speaker has been designed to be used also as stage
monitor (45° angle). By rotating the horn you can maintain the
same coverage angle also when the speaker is used as
monitor.
In the bottom of the box there is a standard pole mount cup
(D36mm) made of aluminium.
DVX D10
®
D10 bi-amped active speaker is equipped with a DIGIPRO
amplifier delivering 400W RMS for the bass section and 200W
RMS for the high frequency section.
D10 active two-way speaker features a neodymium woofer
10” (voice coil 2,5”) and a neodymium compression driver 1”
(voice coil 1,75”) on a 90°x70° aluminium CD- horn.
The speakers’ horizontal directivity is 90° by default factory
setting.
The speaker is made of 12mm birch ply wood, the one top
handle
, the 6 flytracks, the 6 M10 threads and
the 2 flypins located on the sides and the back of the speker
are enabling easy transport
and installation.
The speaker has been designed to be used also as stage
monitor (45° angle). By rotating the horn you can maintain the
same coverage angle also when the speaker is used as
monitor.
In the bottom of the box there is a standard pole mount cup
(D36mm) made of aluminium.
DESCRIPTION
The speakers D8 and D10 of DVX series use cutting edge digital amplifiers of the
®
DIGIPRO series, providing with different powers - 400W and 600W - to meet the
requirements of any kind of application.
These highly efficient amplifiers provide high power with limited weight and dimension.
Thanks to the low power dissipated, the cooling of the amplifier module does not require a
fan.
The digital preamplifier with DSP (Digital Signal Processing) controls the audio crossover
of the acoustic components, the frequency response, the limiter, and the acoustic phase
alignment. A selector enables to select one of two different equalizations - “FULL RANGE”
or “STAGE MONITOR“ - to provide high versatility for the different applications.
®
The amplifiers DIGIPRO 400W e 600W use power supplies featuring SMPS (Switched-
Mode Power Supplies) technology.
This technology increases power supply efficiency and minimizes its weight.
housing
in aluminum
COMMANDS AND FUNCTIONS
1)
“BALENCED INPUT” - “LINK” - “INPUT LINK” CONNECTORS
These balanced inputs can be used to connect balanced or unbalanced
microphones or audio sources at line level (0dB) (eg. preamplifier, mixer, recorder,
CD player, musical instrument, ...).
The balanced connector is connected in parallel and can be used to send the audio
signal to other amplified speakers, recorders or supplementary amplifiers.
2)
“LIMITER” INDICATOR LIGHT
This indicator shows red to indicate that the internal limiter circuit has tripped.
This prevents amplifier distortion and protects the speakers against overloads.
3)
“SIGNAL” INDICATOR LIGHT
This indicator shows green to indicate the presence of the audio signal (at a level of -
20dB).
4)
“READY” INDICATOR LIGHT
This indicator shows green to indicate that the main power voltage is correct.
The LED shows green normal operating conditions
5)
“SENSITIVITY” INPUT SENSITIVITY CONTROL
This control adjusts the sensitivity of the signal amplifier input.
This control does not affect the
“Link” - “Input - Link”
output level
6)
“MODE” SWITCH
This two-way switch allows to choose between two different system presets.
The “FULL RANGE” position allows linear response of the speaker, which is mainly
suitable for the “live” application.
7)
“INPUT SENS” SWITCH
Position the switch in LINE to use a line level source (0 dB) or MIC to use a
microphone.
8)
POWER CABLE SOCKET “MAINS”
Used for connecting the power cable supplied.
9)
FUSE CARRIER “FUSE”
Mains fuse housing.
10)
POWER SWITCH “POWER”
This switch can be used to switch the diffuser on and off.
The “STAGE MONITOR” position makes its use easier in the monitor application by
limiting the low frequencies, which are emphasized by the floor.
M8
M8
M8
M8
M8
Flypin
Flypin
M10
Flytrack
Flytrack
Flypin
Flypin
M10
M10
M10
Handle
Handle