INSTRUCTION MANUAL
A121APPX, AL121APPX & MV121 APPELLO
Alarm Tone and Voice Annunciation Sounder
S4 - Tones
S2 - Set-up
AC Power & Alarm Stage Terminal
Function L.E.D 's
Jumper
DC Power & Alarm
Stage Terminal
On board
Alarm Tone &
microphone
(Voice) Recorded Content Volume Controls
Audio Line-inc
Peak level L.E.D
DC A121APPX, MV121 & AL121APPX Board
AC A121APPX, MV121 & AL121APPX Board
7) Appello Setup Guide
The following guide is designed to get the user quickly interfacing with the Appello unit.
·
The Appello unit can be set-up to either play an attention seeking tone and then a recorded
message or just play the recorded message.
·
The user can:
o
Record on each of the 4 stages using either the Line In or Microphone inputs
o
Select the required alarm tone
o
Delete unwanted messages.
·
To re-record a message on a particular stage, the previous message on that stage must be
deleted first.
·
Once the user has configured the unit, it must be put into it's Playback Mode and S2 switches set
to stage 1, as shown in Quick Ref - Playback Mode (Stage 1 illustrated) guide below.
·
The “Mass Erase” function will erase all the recorded stages.
·
The "Mass Erase" can also be used to reset the unit if any functionality is lost.
