AE Techron LVC 5050, Быстрый старт

Страница: 12 / 24

The CCPIP Input Card
Channel One Controls
VR8 Adjusts common mode rejection for balanced input on
Channel 1.
VR1 Adjusts DC offset of Channel 1 of input card (measured at Pin
7 of U4)
VR3 Adjusts the Channel 1 soft clip circuit:

~ 15V (CW) No Clip

~8V (Center) Minimum Clip

0V (CCW) Max. Clip
VR10 Adjusts DC offset of Channel 1 of amplifier (measured at
output of amplifier). Should be adjusted if gain of amplifier is
changed.
JMPCC1
CV - Puts Channel 1 in Constant Voltage Mode
CC - Puts Channel 1 in Constant Current Mode
(CC or CV must be jumped for channel to operate)
CC1 - Constant Current compensation 1 for Channel 1
connects C 23 and R55
CC2 - Constant Current compensation 2 for Channel 1
connects C27 and R59
NOTE: C18 (Ch.1) C19 (Ch.2) - In parallel with
compensation, controls stability and bandwidth when in
Constant Current Mode
Channel 2 Controls:
VR9 Adjusts common mode rejection for balanced input on
Channel 2
VR2 Adjusts DC offset of Channel 2 of input card
(measured at Pin 7 of U3)
Page 12