Operation with non-approved equipment or unshielded cables is likely to result in interference to radio and
TV reception.
CE CONFORMITY FOR EUROPEAN COUNTRIES
The device com pies with the EMC Directive 2014/30/EU and Low Voltage directive 2014/35/EU.
The following information is only for EU-member states:
The mark is in compliance with the Waste Electrical and Electronic Equipment Directive 2012/19/EU
(WEEE).
The mark indicates the requirement NOT to dispose the equipment including any spent or discarded
batteries or accumulators as unsorted municipal waste, but use the return and collection systems available.
If the batteries, accumulators and button cells included with this equipment, display the chemical symbol Hg,
Cd, or Pb, then it means that the battery has a heavy metal content of more than 0.0005% Mercury or more
than, 0.002% Cadmium, or more than 0.004% Lead.
FOR CANADA
CAN ICES-3 (B)/NMB-3(B)
DECLARATION OF RoHS2 COMPLIANCE
This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European
Parliament and the Council on restriction of the use of certain hazardous substances in electrical and
electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values
issued by the European Technical Adaptation Committee (TAC) as shown below:
Certain components of products as stated above are exempted under the Annex III of the RoHS2 Directives.
Lead as an alloy element in aluminium containing up to 0.4% lead by weight. Copper alloy containing up to
4% lead by weight. Lead in high melting temperature type solders (i.e. lead-based alloys containing 85% by
weight or more lead). Electrical and electronic components containing lead in a glass or ceramic other than
dielectric ceramic in capacitors, e.g. piezoelectric devices, or in a glass or ceramic matrix compound.
Note:
advoli
TM
may have added other regulatory compliances after the publishing of this document. For a
complete view on our regulatory approval compliances, processes, technical setup and results, please visit
our website www.advoli.com/compliance
TA6P-V2-12-09-2018
Page
of
21
22
Restricted Substance
Maximum Threshold Limit
Cadmium and its compounds
100 ppm (0.01 weight %)
Mercury and its compounds
1000 ppm (0.1 weight %)
Hexavalent chromium and its compounds
1000 ppm (0.1 weight %)
Lead and its compounds
1000 ppm (0.1 weight %)
Polybrominated biphenyls (PBB)
1000 ppm (0.1 weight %)
Polybrominated diphenyls (PBDE)
1000 ppm (0.1 weight %)
Bis(2-Ethylhexyl) phtalate (DEHP)
1000 ppm (0.1 weight %)
Benzyl butyl phthalate (BBP)
1000 ppm (0.1 weight %)
Dibutyl phtalate (DBP)
1000 ppm (0.1 weight %)
Diisobutyl phthalate (DIBP)
1000 ppm (0.1 weight %)
