Enable PoC (Read above Warning before proceeding):
If you would like to enable PoC for the advoli
TM
TB6 Standard graphics card, note that the product seizes to
be a HDBaseT compliant and certified product and should not be used with such products other than those
approved in this document. To enable PoC remove the jumper from its default position and place it so that
the jumper covers both protruding pins as depicted in the image below. Only do this when the graphics card
is taken out of a computer/system and has no connected power.
+
Note:
Power over Cable will enable 24V 0.5A on each of the RJ45 connector channels.
No Jumper:
When no jumper is used, the back of the graphics card will look as depicted in the illustration below and the
graphics card will function as a HDbaseT compliant graphics card:
TA6P-V2-12-09-2018
Page
of
19
22
PoC Enabled
This is the non-default
way that will enable
PoC.
